CMER TUNNEL V1.2 & OPTIMA SAVER

Carry G.729a voice calls on 8.1 kbps instead of 42 kbps.

Strip repetitive 40-byte IP+UDP+RTP headers, multiplex up to 256 concurrent calls into one encrypted stream, and traverse CGNAT or LTE firewalls with zero port forwarding.

Request CMER Tunnel brief Compare $40 edge bridges
Powered by CloudAlter CMER v1.2 · Optima Saver wire compression
CMER v1.2 Frame Inspector 80.7% wire reduction
Legacy RTP (50 pkt/s x 60B + L2) 42.0 kbps
IP 20B UDP 8B RTP 12B 20B Voice
CMER v1.2 Multiplexed Stream 8.1 kbps
8.1 kbps 33.9 kbps overhead stripped
Zero-NAT Outbound Profiles SX · TX · UX (0 inbound ports)
Up to 256 ch
PACKET PHYSICS & 1.5 MBPS UPLINK PROOF

Turn a 2.8x oversubscribed branch circuit into 54% clean utilisation.

100 CONCURRENT CALLS ON A 1.50 MBPS LINK 3.39 Mbps reclaimed

4.20 Mbps congested RTP -> 0.81 Mbps clean CMER stream.

Without CMER, 100 G.729a calls demand 4.20 Mbps—saturating a 1.50 Mbps branch circuit 2.8x over. A $40 Cloud Router bundles all 100 calls into 0.81 Mbps, leaving 0.69 Mbps (46%) clean headroom.

20-BYTE PAYLOAD 8.0 kbps Speech Intact G.729a audio frames (zero transcoding loss)
40-BYTE TAX REMOVED IP+UDP+RTP Stripped Eliminates 33.9 kbps wasted per channel
HUB DEMULTIPLEX Standard SIP/RTP Out Zero protocol changes at upstream carriers
OUTBOUND TRANSPORT MODES
0 Ports Works behind CGNAT, LTE/5G & dynamic IPs

Select SX, TX, or UX outbound encrypted profiles per site to balance peak compression, strict firewall traversal, and jitter resilience.

ZERO-NAT EDGE BRIDGE OPTIONS

Three ways to deploy CMER v1.2 at customer branches.

Comparison of Cloud Router, Cloud Pi, and Cloud PC Zero-NAT edge bridges
Bridge Form Factor Hardware / Media Tunnel Modes NAT Traversal Ideal Deployment
Cloud Router ($40) Pre-flashed compact router firmware ($40 hardware) SX / TX / UX outbound encrypted UDP Zero-NAT (CGNAT & LTE/5G safe) Fixed retail offices, remote call centres, branch PBXs
Cloud Pi Dedicated Raspberry Pi OS image SX / TX / UX outbound encrypted UDP Zero-NAT (0 inbound firewall ports) High-density sites up to 256 concurrent channels
Cloud PC Bootable live-USB ISO / local x86 Linux agent SX / TX / UX outbound encrypted UDP Zero-NAT (dynamic IP safe) Rapid pop-up desks and existing workstation hardware
INTERACTIVE BANDWIDTH CALCULATOR

Calculate monthly link cost before and after CMER v1.2.

INTERACTIVE ESTIMATOR · CMER V1.2 PROTOCOL

CMER Tunnel bandwidth and link cost calculator.

Compare legacy 42 kbps per G.729a channel against 8.1 kbps multiplexed CMER v1.2 wire transport (1 Mbps = 1,000 kbps).

Legacy rate: 42 kbps/channel CMER v1.2 rate: 8.1 kbps/channel
WIRE BANDWIDTH CONSUMED
5.04 Mbps 0.97 Mbps 80.7% saved
Proportional wire footprint 4.07 Mbps freed · 19.3% footprint
Monthly link cost (before -> after)
$226.80 -> $43.74 / mo
Monthly bandwidth savings
$183.06 / mo
Annualised bandwidth savings
$2,196.72 / yr
HONEST SCOPE

What we build and run vs. what stays yours.

CLOUD ALTER RUNS

Compression & bridge firmware

  • CMER v1.2 and Optima Saver multiplexing engines (42 -> 8.1 kbps).
  • Cloud tunnel termination across all 7 Cloudfonica global hubs.
  • Pre-built Cloud Router, Cloud Pi, and Cloud PC firmware images.
STAYS 100% YOURS

Carriers, circuits & branch units

  • Your upstream voice carriers, phone numbers, and dial plans.
  • Your local internet access circuits and branch power.
  • Your physical $40 routers, Raspberry Pi units, and IP handsets.
CMER TUNNEL FAQ

Compression and Zero-NAT questions.

Does 8.1 kbps compression degrade audio quality?

No. CMER strips duplicate network headers rather than re-encoding audio—your G.729a voice frames arrive bit-intact.

What are SX, TX, and UX modes?

Selectable outbound transport profiles inside CMER v1.2 tuned for maximum compression, strict firewall traversal, or lossy wireless links.

Do customer offices need static public IPs?

No. Outbound encrypted sessions work cleanly behind dynamic IPs, LTE/5G modems, and carrier-grade NAT.

Does CMER pair with Cloudfonica voice switches?

Yes. CMER terminates natively across all 7 Cloudfonica global hubs as well as private licensed instances.

TORONTO ENGINEERING DESK · PROGRESSIVE BRIEF

Request a CMER Tunnel deployment brief.

Share your concurrent channel density, last-mile link constraints, and target Cloudfonica hub.

01 · Track & Email 02 · Scope & Send
Select platform track
Format: name@company.com. Used solely for our Toronto engineer reply.
Enter a valid work email address in the format name@company.com.
Enter your full name (2 to 100 characters).
Enter your company or organisation name (2 to 120 characters).
Select a target deployment timeline.
Minimum 15 characters. Mention preferred cloud hosts, hubs, concurrent ports/TPS, or edge router count.
Enter at least 15 characters describing your infrastructure and requirements.
Step 2 of 2 · Encrypted REST intake